Phidix Motion Controls (Shanghai) Co., Ltd.
bring you premium products, services & solutions
Add to Cart
Micro Adjust Performance Push-Pull Control Head
【 Product Description 】
We design and manufacture a wide range of aircraft cables. Our mixture, prop/pitch, and throttle micro adjust controls are compliant with FAA requirements. Depressing the center button allows pushing or pulling the knob to make course travel adjustments. Rotating the knob counter-clockwise retracts the output in the finite mode, and clockwise extends.
Four and one-half turns results in 1" of linear travel. Normal vibration does not affect the micro adjust setting. An optional friction lock accessory is available for applications influenced by excessive vibration. A friction lock (only) control head is also available.Various output configurations are available to suit specific applications. The ordering code and technical descriptions show these choices.
|
【 Applications 】
【 Material 】 and Innermember |
【 Features 】
【 Suggested End Fittings 】 |
【 Micro Adjust Control Heads 】
Standard Output - Throttle 565-550
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: from -65°F — +165°F at input end/+230°F at output end |
Lost motion: .030" + .0004 per Normal load: ±20lb |
Wire Rope Output - Throttle 565-557
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: from -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
Solid Wire Output - Throttle 565-558
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 7.00" |
Operating temperature: from -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
Friction Lock Control - Throttle 565-555
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: Lost motion: .030" + .0004 per |
Normal load: 120lb tension, 25lb compression Glass filled nylon control head. |
Standard Output - Mixture 565-550
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: |
Lost motion: .030" + .0004 per degree of bend with ± 5.0lb of force Normal load: ± 20lb Glass filled nylon control head. |
Wire Rope Output - Mixture 565-557
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: from -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
Solid Wire Output - Mixture 565-558
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: from -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
Standard Output - Prop/Pitch 565-550
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 7.00" |
Operating temperature: from -65°F — +230°F Normal load: ±20lb |
Lost motion: .030" + .0004 per degree of bend with ± 5.0lb of force Glass filled nylon control head. |
Wire Rope Output - Prop/Pitch 565-557
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 3.00" |
Operating temperature: ffrom -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
Solid Wire Output - Prop/Pitch 565-558
| Notes: (Design Parameters) Stroke: 3.00" Minimum bend radius: 7.00" |
Operating temperature: ffrom -65°F — +165°F at input end/+230°F at output end |
Normal load: Unspecified (determined by installation configuration) Glass filled nylon control head. |
【 Ordering Codes 】
All line art dimensions are represented in inches